Napkin + Tile + Mod Podge = Coaster

I've posted a tutorial on these before but it just doesn't seem right to post a picture of a finished project without a tutorial.

Supplies needed:

• Mod Podge
• Tile
• Foam brush
• Decorative napkin
• Cork or other material for the bottom of the tile to protect your surface. (not pictured.)

Step 1: Open the napkin.

Step 2: Remove the back ply of the napkin.

Step 3: Check to make sure there isn't another ply - having the thinnest possible top for your coaster makes a lot of different.

Step 4: Cut the napkin in the sections you want for each coaster.

Step 5: Making sure you're staring with a clean, dry tile, apply mod podge to the surface with a foam brush.

Step 6: After spreading the mod podge across the tile, apply the napkin to the surface and brush with another coat of mod podge.

Step 7: Once the first coat is completely dry, flip the tiles over and trim the edge of the napkin to within an 1/8th of an inch.

Step 8: Wrap the edge of the napkin around the side of the tile and apply another coat of mod podge to the entire tile. Repeat a few times.

Step 9: Apply the protective felt/cork to the tile and you've got a set of coasters.